Rubber Abdullah Open Mixing Kneader Processing Dough Machine

Basic Info.

Model NO.	NHZ-118
Packing	Wodden Box
Suitable Material	EVA,Rubber,BMC,Greece,Gum
Voltage	220V/380V/415V/Custom
Color	Custom
Transport Package	Wooden Box
Specification	NHZ-100
Trademark	HENGMING
Origin	China
Production Capacity	100 Sets/Year

Product Description

The Rubber Abdullah Open Mixing kneader Processing Dough Machine is available with a variety of blades in different shapes as well as with number of discharging methods and mixing conditions. This kneader has already achieved considerable renown in a wide range of industries that deal with such high and medium-viscosity materials as adhesives, agglutinates magnetic materials and chemical material mixing.
To guarantee the machine's excellent performance, high accuracy, and high efficiency,the Rubber Abdullah Open Mixing kneader Processing Dough Machine adopt high quality components from world famous brands like NSK,Siemens,Rexroth etc .

GENERAL INFORMATION
1.1	Capacity	1L
1.2	Technical Standard	Design and manufacture according to relevant industry standards.
1.3	Drawing	Equipment general assembly drawing and equipment installation location drawing are provided.
STRUCTURE
2.1	Structure	Horizontal double shaft type
POT
3.1	Capacity	Total Capacity:1L
		Effective Working Volume:1L
3.2	Shape	"W" Shape
3.3	Material	The Pot body is made of SUS304 stainless steel, the thickness of the pot body is 3 mm
		Adopt jacket heating method, Q235 carbon steel plate, thickness 4 mm.
3.4	Processing	Pot internal roundness control within the 0.5 mm
		The pot is tempered integrally, and the process temperature is 450ºC.
		The surface roughness of the two sides of the pot body is 3.2-1.6
3.5	Design Pressure	Working pressure 0.4Mpa,design pressure 0.6Mpa,testing pressure 0.6Mpa
HEATING SYSTEM
4.1	Method	Heat conduction oil electric heating tube heating
4.2	Design Temperature	Oil Temperature:230ºC Pot Temperature:210ºC
4.3	Heating Power	1.5KW

BLADE
5.1	Shape	∑ type. Stirring impeller is made by Zg45 cast steel . Its chemical composition is: Co: 0.52; Mn: 0.50-0.80; Sio: 20-0.45; S. P ≤0.04. It is a first-class casting
5.2	Material	In order to ensure the surface quality of steel castings, secondary shot blasting is adopted, and 3mm 304 stainless steel is outsourced.
5.3	Processing	In order to ensure the mechanical properties of steel castings, normalizing tempering treatment is adopted, heating for 60 hours and heat preservation for 5-6 hours.
5.4	Support Form	Single bearing (four bearings in total)	NSK
5.5	Position	Interval between blade and pot is 1±0.5mm
5.6	Speed	I Blade:48rpm, 2nd Blade:36rpm
WALL PLATE
6.1	Material	Combined material of wall plate on both sides: The inner wall is clad with 304 stainless steel, and the thickness of wallboard is 3mm.
		Combined material of wall plate on both sides: The external steel plate is Q235 material,and the thickness of wallboard is 8 mm.
		Overall bearing bracket is Q235 material
6.2	Processing	The concentricity and parallelism of the main shaft holes of the wallboard at both ends are 0.02 mm and 0.02 mm respectively.
LID
7.1	Opening Method	Circular type manual lid opening
7.2	Material	Cover with 3mm thick SUS304 stainless steel

STUFFING BOX
8.1	Replacement	The stuffing box is equipped with a pull-back stroke bigger than 100 mm to facilitate the replacement of the stuffing.
8.2	Seal	Stuffing box seal: the inner tetrafluoroethene hot ring and the outer t eflon packing seal meet the sealing requirements.
8.3	Processing	Wear-resistant welding of stainless steel pile is used for the shaft seal. The surfacing distance is 20mm beyond the stuffing box. After processing, the thickness is ≥8 mm and the roughness should reach 1.6.
MAIN BODY BRACKET
9.1	Material	The overall material of the main bracket at both ends is Q235.The main chassis and the machine base are welded separately.
MACHINE BASE
10.1	Material	The overall material of the machine base is Q235 steel plate.
10.2	Processing	The whole machine base is made of channel steel welded, and the whole base is heat treated after manufacture.
		The base of the machine is integral structure. The main body, motor and other accessories share the same base.

ELECTRIC CONTROL
11.1	Function	Full set electric control cabinet including:Main engine forward rotation, reverse rotation, stop, heating switch, discharging forward rotation, discharging reverse rotation, voltmeter and ammeter,temperature control	S.CHNEIDER & CHINT
11.2	Drive Motor	1.1KW, 380V/220V/110V	SIEMENS (BEIDE)
HYDRAULIC PARTS
12.1	Model	BWD-1-30 Cycloid reducer	GUOMAO REDUCER GROUP
12.2	Vacuum Pump Power	0.75KW
DISCHARGING METHOD
13.1	Discharging	Titling Discharging
OTHER INFORMATION
14.1	Machine Size	1200*500*1400 mm (Without Packing)
14.2	Net Weight	140KG (Net Weight)
14.3	Gross Weight	210KG (Gross Weight)

Q: Are you a factory?
A: We are manufacturer of the Rubber Abdullah Open Mixing kneader Processing Dough Machine. Our company specialized in manufacturing and exporting kneader mixer for over 20 years.
Q:What certificate you can provide?
A:We have CE&SGS cetificates.
Q:What is the delivery time for the pressure die casting machine?
A: 7 days if the machine in stock.If not,It will takes 20-30 work days according your quantity and required model.
Q:What service you can provide?
A:We provide turn key service of mixing project. We also help our customer in cost estimation,factory layout,formula research and development etc.
Q:What's the guarantee time for die casting machine?
A: We providing a 12 months' guarantee period for our machine since the arrival of destination port.
Q:What's after-sale service you will provide?
A: We provide lifetime warranty service for machines. During the warranty period, we provide spare parts that are not artificially damaged free of charge, and after the warranty period expires, we provide damaged parts at the cost price.Local install&training service are also provided if necessary.